VSB2045-M3 www.vishay.com vishay general semiconductor revision: 22-nov-13 1 document number: 89391 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 photovoltaic solar cell protection schottky rectifier ultra low v f = 0.30 v at i f = 5.0 a features ? trench mos schottky technology ? low forward voltage drop, low power losses ? high efficiency operation ? high forward surge capability ? esd capability ? solder dip 275 c max. 10 s, per jesd 22-b106 ?t j 200 c max. in solar bypass mode application ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in solar cell junction box as a bypass diode for protection, using dc forward current without reverse bias. mechanical data case: p600 ? molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free, rohs-compliant, and commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? m3 suffix meets jesd 201 class 1a whisker test polarity: color band denotes cathode end notes (1) with heatsink (2) with heatsink, free air (3) meets the requirements of iec 61 215 ed. 2 bypass di ode thermal test primary characteristics i f(av) 20 a v rrm 45 v i fsm 250 a v f at i f = 20 a 0.42 v t op max. (ac mode) 150 c t j max. (dc forward current) 200 c package p600 diode variation single die p600 tmbs ? maximum ratings (t a = 25 c unless otherwise noted) parameter symbol vsb2045 unit device marking code v2045 maximum repetitive pe ak reverse voltage v rrm 45 v maximum average forward rectified current (fig. 1) i f(av) (1) 20 a i f(av) (2) 6.5 peak forward surge current 8.3 ms single half ? sine-wave superimposed on rated load i fsm 250 a operating junction temperature range t op -40 to +150 c storage temperature range t stg -40 to +175 c junction temperature in dc forward current ? without reverse bias, t ? 1 h t j (3) ? 200 c
VSB2045-M3 www.vishay.com vishay general semiconductor revision: 22-nov-13 2 document number: 89391 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: 40 ms pulse width ? notes (1) without heatsink, free air; units mo unted on pcb with 2 mm x 2 mm co pper pad areas at 9.5 mm lead length (2) leads clipped at 3 mm lead length from plastic body on 7.0 cm x 2.2 cm x 1.9 cm x 2 heatsink notes (1) immunity to iec 61000-4-2 air discharg e mode has a typical performance > 25 kv (2) system esd standard ? electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage i f = 5.0 a t a = 25 c v f (1) 0.44 - v i f = 10 a 0.46 - i f = 20 a 0.50 0.58 i f = 5.0 a t a = 125 c 0.30 - i f = 10 a 0.35 - i f = 20 a 0.42 0.50 reverse current v r = 45 v t a = 25 c i r (2) 23.4 1200 a t a = 125 c 11.9 35 ma typical junction capa citance 4.0 v, 1 mhz c j 2050 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol vsb2045 unit thermal resistance r ? ja (1) 55 c/w r ? jl (1) 3.5 typical thermal resistance r ? jl (2) 2.5 c/w immunity to electrical static di scharge to the following standards ? (t a = 25 c unless otherwise noted) standard test type test co nditions symbol class value jesd22-a114 human body model (con tact mode) c = 150 pf, r = 1.5 ? v c 3b > 8 kv jesd22-a115 machine model (con tact mode) c = 200 pf, r = 0 ? c > 400 v iec 61000-4-2 (2) air discharge mode (1) c = 150 pf, r = 330 ? 4 > 15 kv ordering information (example) preferred p/n unit weight (g) preferred pa ckage code base quantity delivery mode VSB2045-M3/54 1.88 54 800 13" diameter paper tape and reel VSB2045-M3/73 1.88 73 300 ammo pack packaging
VSB2045-M3 www.vishay.com vishay general semiconductor revision: 22-nov-13 3 document number: 89391 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - rated forward current vs. ambient temperature fig. 3 - forward power loss characteristics fig. 4 - typical instantaneous forward characteristics fig. 5 - typical reverse leakage characteristics fig. 6 - typical j unction capacitance ambient temperature (c) dc forward current (a) 8 7 6 5 1 0 0 25 50 75 100 175 4 3 125 150 2 free air, without heatsink 120 0 0 50 100 150 200 ambient temperature (c) percentage of rated current (%) 100 80 60 40 20 25 75 125 175 dc current with heatsink 0 6 8 10 14 0 4 8 20 24 average forward current (a) average power loss (w) d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0 12 4 2 16 12 d = t p /t t p t instantaneous forward voltage (v) 0 0.2 0.4 0.7 100 10 1 0.1 t a = 150 c t a = 125 c t a = 100 c t a = 25 c 0.6 instantaneous forward current (a) 0.1 0.3 0.5 20 40 60 80 100 1000 100 10 1 100 000 10 000 percent of rated peak reverse voltage (%) instantaneous reverse current (a) t a = 150 c t a = 25 c t a = 100 c t a = 125 c 100 10 000 0.1 1 10 100 reverse voltage (v) junction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 mv p-p 1000
VSB2045-M3 www.vishay.com vishay general semiconductor revision: 22-nov-13 4 document number: 89391 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) 0.052 (1.32) 0.048 (1.22) 0.360 (9.1) 0.340 (8.6) dia. 1.0 (25.4) min. 0.360 (9.1) 0.340 (8.6) 1.0 (25.4) min. p600
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
